- Home
- About G.R.I.M.E.X.
- FD 3600
The FD 3600 gear cutting machine is designed for machining gears with diameters between 550 mm and 3,600 mm with a weight up to 25 tons. It is characterized by a high degree of accuracy, quality of the teeth surface and the ability to emit a large amount of chips in the time unit. It uses a hobbing cutter tool.
Main technical specifications:
- Diameter of the processed wheels: max. 3,500 mm;
- in case of using the automatic shut-off device of the radial feed (the case of the worm wheels): min. 690 mm;
- in case of not using the automatic shut-off device ( the case of the cylindrical wheels) ): min. 550 mm;
- Difference between the center of the table and the center of the milling tool spindle: max. 2,000 mm;
- in case of using the automatic shut-off device of the radial feed: min. 420 mm;
- in case of not using the automatic shut-off device of the radial feed: min 350 mm;
- Diameter of the milling spindle: 60 mm;
- Number of processed teeth: min.30; max. 540;
- Maximum size of the worm milling tool: diameter: 350 mm; length: 400 mm;
- Diameter of the machine table: 1,900 mm;
- Diameter of the division crown: 2,200 mm;
- Number of revolutions of the milling spindle (three steps with continuous adjustment) : 5÷60 rpm;
- Axial displacement of the worm milling tool: 120 mm;
- Rotation angle of the milling head: ± 45°;
- Maximum mode depending on the diameter of the workpiece:
- Up to 2,500 mm for m= 30;
- 2,500 mm ÷ 3,000 for m= 25;
- 3,000 mm ÷ 3,500 for m= 20;
- Maximum processing mode with the milling head with the finger milling: m= 40 ;
- Maximum processing mode with the slotting head for the inner teeth: m= 10 ;
- Maximum load on the table : 25,000 kg;
- Machine weight without special accessories: 52,000 kg;